Cisco Compact EGC Amplifier Model 93250 Guia Da Instalação
4015252 Rev C
1
Compact EGC Amplifier 93250
Installation and Setup Instructions
Installation and Setup Instructions
Application
The Compact Amplifier type 93250 has one active output and is used in trunk and
distribution applications. The amplifier can be monitored via the compact
transponder and the ROSA
distribution applications. The amplifier can be monitored via the compact
transponder and the ROSA
™
Element Management System. All equalizers and pads
are electronic and can be set with the handheld terminal type 91200. The plug-in
filters in the reverse path allow flexible choice of frequency range for both forward
and reverse path.
filters in the reverse path allow flexible choice of frequency range for both forward
and reverse path.
1
AC connection max.1
5A at
remote supply
Power supply fuse
(2AT at 230V)
(5AT at remote supply)
(2AT at 230V)
(5AT at remote supply)
Reverse equlizer (plug-in)
Type 74141-xx
Type 74141-xx
Input splitter
Type 74089 0 dB link
Type 77041 3.5/3.5 dB
Type 77042 2/6 dB
Type 77043 1.5/10.5dB
Type 74089 0 dB link
Type 77041 3.5/3.5 dB
Type 77042 2/6 dB
Type 77043 1.5/10.5dB
Fuses (turnable)
Choose AC-pass
Choose AC-pass
Terminal for earthing
DC-voltage indicator
24 V DC
24 V DC
Test point output
-20 dB, directional
-20 dB, directional
Test point input
-20 dB, bidirectional
-20 dB, bidirectional
Compact Transponder
Type 91051
Type 91051
/ 91063
Diplex Filter
Type 75130-xxxx
If no reverse path wanted;
Use 0 dB link type 74089
Type 75130-xxxx
If no reverse path wanted;
Use 0 dB link type 74089
Mounting fittings
(total 3 pcs.)
(total 3 pcs.)
AUX Plug-in module
Equalizer
Equalizer
74100-xxx
Inv.Equalizer 74190-xx
Attenuator
Attenuator
77150-xx
0 dB Link
74069
Output splitter
Type 74069 0 dB link
Type 77041 3.5/3.5 dB
Type 77042 2/6 dB
Type 77043 1.5/10.5dB
Type 74069 0 dB link
Type 77041 3.5/3.5 dB
Type 77042 2/6 dB
Type 77043 1.5/10.5dB
Low voltage lockout
Type 75018-xx
Type 75018-xx
Reverse Test Point
-20 dB, directional coupled
-20 dB, directional coupled
Reverse injection Test Point
-20 dB, directionalt
-20 dB, directionalt
Diplex Filter
Type 75130-xxxx
If no reverse path wanted;
Use 0 dB link type 74089
Type 75130-xxxx
If no reverse path wanted;
Use 0 dB link type 74089
Figure 1: Amplifier overview