Cisco Laser Link Receivers Ficha De Dados
Description
The Proteus Node
Return Digital Transmitter with Ethernet is
a digital, return path transmitter that has the capability of
adding an Ethernet module that can provide point-to-point 10
Mbps and 100 Mbps Ethernet drops. This product must be
used in conjunction with the Laser Link
adding an Ethernet module that can provide point-to-point 10
Mbps and 100 Mbps Ethernet drops. This product must be
used in conjunction with the Laser Link
Return Digital
Receiver with Ethernet.
The base node transmitter module (left half of photo shown)
digitizes two separate signals in a frequency band between 5-
42 MHz. It multiplexes the digital signals together into a serial
digital bit stream then converts the digitized signal to an
optical signal and transmits the optical signal to the receiver.
The Ethernet node receiver module attaches to the base
node transmitter module and provides up to five full duplex
10Base-FL and one 100Base-FX Ethernet drops.
The base node transmitter module (left half of photo shown)
digitizes two separate signals in a frequency band between 5-
42 MHz. It multiplexes the digital signals together into a serial
digital bit stream then converts the digitized signal to an
optical signal and transmits the optical signal to the receiver.
The Ethernet node receiver module attaches to the base
node transmitter module and provides up to five full duplex
10Base-FL and one 100Base-FX Ethernet drops.
Features
•
Multiple point-to-point Ethernet drop capability
•
More efficient use of fiber
•
Minimal actives in the network
•
Cost-effective; two return RF signals per transmitter
•
Enhanced security through digital transmission
•
Combines traditional return path traffic with upstream Ethernet traffic
•
Up to 20 optical wavelengths over a single fiber
•
Up to five 10 Mbps and one 100 Mbps Ethernet drop per Ethernet node receiver module
•
Ethernet drops are single-mode full duplex and can be used up to 40 km
•
Up to 40 return path RF signals over a single fiber
•
Network management (status monitoring) ready
•
-20 dB RF input test points
Optoelectronics
Proteus
Node
Return Digital Transmitter with Ethernet