Cisco Cisco Prime Collaboration Assurance 11.5 White Paper
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 27 of 45
When the domain sync is run, these users are synchronized:
●
CCM1: Users with department co
de “Dept1”
●
CCM2: Users with department code “Dept1” and with phones whose device pool is “DevicePool2”
●
CCM3: Users with the department code “Dept1” and with phones whose device pool is “DevicePool3” and
whose location is “Location3”
whose location is “Location3”
Configuring Rules Step by Step
Domains rules need to be configured properly before a sync is performed.
Step 1. Configure how users are placed in the domain.
Select
●
AssociateAllUsersInCallProcessor + AssociateAllUsersInUMProcessor
OR
●
AssociateOnlyExistingUsers
OR any combination of
●
AssociateUsersByDeptCode
●
AssociateUsersByDevicePool
●
AssociateUsersByLocation
Step 2. Configure how services for a user are assigned to service areas.
●
Non-RestrictedDomainSync
(disabled by default)
Optional:
●
AssociateAllUsersInUMProcessor
●
TakePrimaryUserInfoFromUMProcessor
Example:
Customer has an Active Directory integrated Communications Manager and has different domains set up for
different branches.
Step 1.
Option 1:
●
Set the department in Active Directory for users.
●
Enable the AssociateUsersByDeptCode rule for each domain and specify the department code.
Option 2:
●
Users can be placed using a combination of these rules: AssociateUsersByDevicePool and
AssociateUsersByLocation.
●
This requires that all users have an associated phone.