Cisco Cisco Unified Contact Center Enterprise 9.0(1) Guia Da Instalação
B-15
Remote Silent Monitoring Installation and Administration Guide
Appendix B Registry Keys
Cluster Configuration Registry Keys
ClusterN_PhoneSim_StartLineNumRange
First extension number to use for auto-generation of line extension range for
simphone DNs. Correlates to ClusterN_PhoneSim_StartMACRange value.
simphone DNs. Correlates to ClusterN_PhoneSim_StartMACRange value.
If 1000 is specified, and 000000100010 is ClusterN_PhoneSim_StartMACRange,
then the first simphone device name generated will be SIP000000100010 and will
have line extension 1000; SIP000000100011 will have line extension 1001;
SIP000000100012 will have line extension 1002, and so forth.
then the first simphone device name generated will be SIP000000100010 and will
have line extension 1000; SIP000000100011 will have line extension 1001;
SIP000000100012 will have line extension 1002, and so forth.
Line extension ranges must not overlap between clusters.
Type: REG_SZ
Value Required: Yes
Valid Values: Four to six digit number
Default Value: 1000
ClusterN_PhoneSim_SIPTransport
Tells PhoneSim how to conduct the SIP transmission with Contact Manager for
the cluster, via TCP or UDP.
the cluster, via TCP or UDP.
Type: REG_SZ
Value Required: Yes
Valid Values: tcp or udp
Default Value: tcp
ClusterN_PhoneSim_CM1_HostName
IP address or hostname of the primary Contact Manager that PhoneSim will hone
its simphones to for the cluster.
its simphones to for the cluster.
Type: REG_SZ
Value Required: Yes
Valid Values: Valid IP address, in dotted decimal notation; or hostname
Default Value: None