Moxa EDS-408A-1M2S-SC Folheto
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Industrial Ethernet Solutions
Optical Fiber
EDS-405A/408A Series
Introduction
The EDS-405A/408A are entry-level 5 and 8-port managed Ethernet
switches designed especially for industrial applications. The switches
support a variety of useful management functions, such as Turbo
Ring, Turbo Chain, ring coupling, port-based VLAN, QoS, RMON,
switches designed especially for industrial applications. The switches
support a variety of useful management functions, such as Turbo
Ring, Turbo Chain, ring coupling, port-based VLAN, QoS, RMON,
IPv6 Ready logo awarded (IPv6 Logo Committee certified)
•
DHCP Option 82 for IP address assignment with different policies
•
Modbus/TCP industrial Ethernet protocol supported
•
Turbo Ring and Turbo Chain (recovery time < 20 ms at full load),
•
and RSTP/STP (IEEE 802.1w/D)
IGMP snooping and GMRP for filtering multicast traffic
IGMP snooping and GMRP for filtering multicast traffic
•
Specifications
Plug-n-Play Turbo Ring and Turbo Chain with fast recovery time
›
(under 20 ms)
IGMP Snooping QoS, IEEE 802.1Q VLAN, SNMPv1/v2c/v3, RMON
›
supported
Automatic warning by exception through e-mail, relay output
›
User-friendly web-based configuration and management
›
ABC-01 (Automatic Backup Configurator) for system configuration
›
backup (optional accessory)
5 and 8-port entry-level managed Ethernet switches
bandwidth management, port mirroring, and warning by email or relay.
The ready-to-use Turbo Ring can be set up easily using the web-based
management interface, or with the DIP switches located on the top
panel of the EDS-405A/408A switches.
The ready-to-use Turbo Ring can be set up easily using the web-based
management interface, or with the DIP switches located on the top
panel of the EDS-405A/408A switches.
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network
•
planning
QoS (IEEE 802.1p and TOS/DiffServ) to increase determinism
QoS (IEEE 802.1p and TOS/DiffServ) to increase determinism
•
RMON for efficient network monitoring and proactive capability
•
SNMPv1/v2c/v3 for different levels of network management
•
security
Bandwidth management to prevent unpredictable network status
Bandwidth management to prevent unpredictable network status
•
Port mirroring for online debugging
•
Features and Benefits
100BaseFX
Multi-mode
Single-mode
Wavelength
1300 nm
1310 nm
Max. TX
-10 dBm
0 dBm
Min. TX
-20 dBm
-5 dBm
RX Sensitivity
-32 dBm
-34 dBm
Link Budget
12 dB
29 dB
Typical Distance
5 km
a
4 km
b
40 km
c
Saturation
-6 dBm
-3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm single-mode fiber optic cable
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, TFTP, SNTP, SMTP, RARP, RMON, HTTP, Telnet, Syslog,
DHCP Option 66/67/82, BootP, LLDP, Modbus/TCP, IPv6
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP
MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, TFTP, SNTP, SMTP, RARP, RMON, HTTP, Telnet, Syslog,
DHCP Option 66/67/82, BootP, LLDP, Modbus/TCP, IPv6
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP
MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch Properties
MAC Table Size: 2 K (EDS-405A), 8 K (EDS-408A)
Packet Buffer Size: 1 Mbit
Packet Buffer Size: 1 Mbit
Interface
Fiber Ports: 100BaseFX ports (SC/ST connector)
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection
Console Port: RS-232 (RJ45 connector)
DIP Switches: Turbo Ring, Master, Coupler, Reserve
LED Indicators: PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL,
10/100M
Alarm Contact: 1 relay output with current carrying capacity of 1 A @
24 VDC
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection
Console Port: RS-232 (RJ45 connector)
DIP Switches: Turbo Ring, Master, Coupler, Reserve
LED Indicators: PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL,
10/100M
Alarm Contact: 1 relay output with current carrying capacity of 1 A @
24 VDC
Power Requirements
Input Voltage: 24 VDC (12 to 45 VDC), redundant dual inputs
Input Current:
EDS-405A: 0.24 A @ 24 V
EDS-405A-MM/SS: 0.32 A @ 24 V
EDS-408A: 0.26 A @ 24 V
EDS-408A-MM/SS: 0.35 A @ 24 V
EDS-408A-3M/3S/2M1S/1M2S: 0.32 A @ 24 V
Overload Current Protection: Present
Connection: 1 removable 6-contact terminal block
Reverse Polarity Protection: Present
Input Current:
EDS-405A: 0.24 A @ 24 V
EDS-405A-MM/SS: 0.32 A @ 24 V
EDS-408A: 0.26 A @ 24 V
EDS-408A-MM/SS: 0.35 A @ 24 V
EDS-408A-3M/3S/2M1S/1M2S: 0.32 A @ 24 V
Overload Current Protection: Present
Connection: 1 removable 6-contact terminal block
Reverse Polarity Protection: Present