Cisco Cisco SG300-52 52-Port Gigabit Managed Switch Referências técnicas

Quality of Service (QoS) Commands

888

78-21485-01 Command Line Interface Reference Guide

49

Use the qos statistics policer Interface Configuration (Ethernet, Port-channel) 
mode command to enable counting in-profile and out-of-profile. Use the no form of 
this command to disable counting.

This command is relevant only when policers are defined.

Syntax

qos statistics policer 

policy-map-name

 

class-map-name

no qos statistics policer 

policy-map-name

 

class-map-name

Parameters

•

policy-map-name—Specifies the policy map name.

•

class-map-name—Specifies the class map name.

Default Configuration

Counting in-profile and out-of-profile is disabled.

Command Mode

Interface Configuration (Ethernet, Port-channel) mode

Example

The following example enables counting in-profile and out-of-profile on the 
interface.

console(config)#interface 

gi

1

switchxxxxxx(config-if)# 

 policy1 class1

Use the qos statistics aggregate-policer Global Configuration mode command to 
enable counting in-profile and out-of-profile. Use the no form of this command to 
disable counting.

Syntax

qos statistics aggregate-policer 

aggregate-policer-name