Cisco Cisco Email Security Appliance C170 Referências técnicas

Enter the Trap target (IP address). Enter "None" to disable traps.

[None]> snmp-monitor.example.com

Enterprise Trap Status

1. RAIDStatusChange             Enabled

2. fanFailure                   Enabled

3. highTemperature              Enabled

4. keyExpiration                Enabled

5. linkDown                     Enabled

6. linkUp                       Enabled

7. powerSupplyStatusChange      Enabled

8. resourceConservationMode     Enabled

9. updateFailure                Enabled

Do you want to change any of these settings? [N]> y

Do you want to disable any of these traps? [Y]>

Enter number or numbers of traps to disable. Separate multiple numbers with commas.

[]> 1,8

Enterprise Trap Status

1. RAIDStatusChange             Disabled

2. fanFailure                   Enabled

3. highTemperature              Enabled

4. keyExpiration                Enabled

5. linkDown                     Enabled

6. linkUp                       Enabled

7. powerSupplyStatusChange      Enabled

8. resourceConservationMode     Disabled

9. updateFailure                Enabled

Do you want to change any of these settings? [N]>

Enter the System Location string.

[Unknown: Not Yet Configured]> Network Operations Center - west; rack #31, position 2

Enter the System Contact string.

[snmp@localhost]> Joe Administrator, x8888

Current SNMP settings:

Listening on interface "Data 1" 192.168.2.1/24 port 161.

SNMP v3: Enabled.

SNMP v1/v2: Enabled, accepting requests from subnet 192.168.2.0/24.

SNMP v1/v2 Community String: public

Trap target: snmp-monitor.example.com

Location: Network Operations Center - west; rack #31, position 2

System Contact: Joe Administrator, x8888

mail3.example.com>

Continuously display the end of a log file. The tail command also accepts the name or number of a log 
to view as a parameter: 

tail 9

 or 

tail mail_logs.