Cisco Cisco TelePresence MX700 Folheto
Manual registration of the endpoint
Product specific configuration layout
Navigate to the Product Specific Configuration Layout section:
If registered to TMS (Cisco TelePresence Management Suite)
or CTSMAN (Cisco TelePresence Manager), configure the
product specific configuration layout as appropriate.
Room Name (from Exchange(R)): This is the Exchange
Conference room Name. It is used for scheduling meetings
where this TelePresence system participates. This setting
must match the e-mail address used in Exchange exactly.
Example: room123@example.com. Maximum length is 64
characters.
Web Access: This parameter indicates whether the device
accepts connections from a web browser or other HTTP
clients. Disabling the web server functionality of the device
will block access to the TelePresence system's internal
web pages and certain support capabilities, but will not
degrade normal operation. Default value is Disabled.
NOTE:
For the Web Access configuration change to take
effect, please make sure to Save and RESET the device
(do not use restart or Apply Config).
SSH Access: This parameter indicates whether the device
accepts SSH connections. Disabling the SSH server
functionality of the device will block certain support
capabilities such as log file collection but will not degrade
normal operation. Default value is Disabled.
Continues on the next page...
Navigate to: Device > Phone > Phone Configuration (continued from the previous page).
Navigate to the
Product Specific Configuration Layout section.
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Quick Reference Guide
D14996.02 Administering TC6.1 Endpoints on CUCM 9.1.1, April 2013.
www.cisco.com — Copyright © 2013 Cisco Systems, Inc. All rights reserved.
14
Mandatory Optional
Contents
Introduction
CUCM configuration
Endpoint configuration
About passwords
Appendices
CUCM configuration