Cisco Cisco TelePresence MX700

Audio Console

Creating a simple frequenCy response

As an introductory example we shall run through the
process of creating a simple peaking (band pass) filter.

Such a filter is characterized by the center frequency f

the gain and the Q-value.

Do as follows:

1. Click and drag on any of the six points along the

frequency axis. The one selected turns yellow and will
move as you drag.

2. Move vertically to set the gain and sideways to

change the center frequency.

3. Use the handles to modify the Q-value.

Click on this point

and drag

this is the peak

gain of the filter

drag this point

sideways to

change the

center frequency

these are

width handles

to change the

q-value.

Introduction

Contents

Video compositor

Sources of inspiration