Cisco Cisco TelePresence MX700

D14778.02 TC Console version 6 User Guide | © 2013 Cisco Systems, Inc. All rights reserved.

6

When the TC Console utility is connected to a codec, 
synchronization will take place automatically. This means 
that any changes made in the Video Compositor or 
the Audio Console will immediately be uploaded to the 
codec through the synchronization process. 

This works both ways; as soon as connection has been 
established, any more recent configuration stored in the 
codec will be copied to the TC Console utility.

You may not want live synchronization to take place. You 
should then disconnect from the codec before you start 
working with the TC Console. Your configuration project 
can be stored on your computer like any other file. When 
all settings and alterations have been made, just connect 
to the codec and the synchronization process will take 
care of the uploading.

However, sometimes you may want to create settings 
whose effects you would like to monitor immediately. 
This could typically be “cut and try” adjustments using 
the Audio console equalizer settings (see page 27). In 
such cases you should stay connected with the codec.

Establishing connection with the codec:

1. Click on 

 > 

.

2. You will now be prompted to key in the IP address (or 

the Host name) and the password to the codec.

3. As soon as connection has been established, the 

configuration stored in the codec will be copied to the 
TC Console utility.

Introduction

Contents

Video compositor

Audio Console

Sources of inspiration