Cisco Cisco Web Security Appliance S370 Guia Do Utilizador

For more information about virtual appliance licensing, see the Cisco Content Security Virtual Appliance 
Installation Guide, available from 

You cannot open a Technical Support tunnel before installing the virtual appliance license.

After the license expires, the appliance will continue to serve as a web proxy without security services 
for180 days. Security service updates do not occur during this period. 

You can configure the appliance so you receive alerts about license expiration. 

See the Cisco Content Security Virtual Appliance Installation Guide, available from 

The ability to remotely reset the power for the appliance chassis is available only on 80-series hardware. 

If you want to be able to remotely reset appliance power, you must enable and configure this 
functionality in advance, using the procedure described in this section. 

Cable the dedicated Remote Power Cycle (RPC) port directly to a secure network. For information, 
see the hardware guide for your appliance model. For the location of this document, see 

Ensure that the appliance is accessible remotely; for example, open any necessary ports through the 
firewall. 

This feature requires a unique IPv4 address for the dedicated Remote Power Cycle interface. This 
interface is configurable only via the procedure described in this section; it cannot be configured 
using the 

ipconfig

 command. 

In order to cycle appliance power, you will need a third-party tool that can manage devices that 
support the Intelligent Platform Management Interface (IPMI) version 2.0. Ensure that you are 
prepared to use such a tool. 

For more information about accessing the command-line interface, see 

 

Use SSH or the serial console port to access the command-line interface. 

Sign in using an account with Administrator access. 

Enter the following commands: