Cisco Cisco Agent Desktop 8.5 Guia Da Instalação
Cisco CAD Installation Guide 7.1
36
November 2006
Figure 7.
System IPCC dialog box.
3. Identify if this is a System IPCC installation.
■
If you answer Yes, then default peripheral IDs are set to 1000, and
agents and supervisor login by name becomes the only login option
(login by login ID is disabled).
agents and supervisor login by name becomes the only login option
(login by login ID is disabled).
■
If you answer No, then peripheral IDs are set to 5000 and agents and
supervisors can log in by login name or login ID. This option is configured
later in Cisco Desktop Administrator.
supervisors can log in by login name or login ID. This option is configured
later in Cisco Desktop Administrator.
The Configuration Setup tool appears, with the CallManager node selected
(see
(see
4. Complete the fields in each window, using the right arrow on the toolbar to
move forward to the next window.
■
You cannot move forward until all required information is entered.
■
You cannot skip a window.
■
You can go backwards at any time to revisit a previous window.
■
The Save button is not enabled until all windows are completed.
5. When you have completed all windows in the tool, click Save on the toolbar
or choose File > Save.
When the data is successfully saved, the program ends itself automatically.
NOTE: The save process may take several minutes.
To enter configuration data in Initial Mode on the secondary Base services computer:
1. Configuration Setup starts automatically and displays the CAD Directory
Services dialog box (see
).
2. Enter the IP address of the primary Directory Services and then click OK.
).