Cisco Headend Digital Broadband Delivery System Guia Da Instalação
Install the DNCS GUIs and WUIs
4036043 Rev B
49
Install the DNCS GUIs and WUIs
Complete these steps to install the SR 2.8.1/3.8.1/4.3.1 DNCS GUI and WUI
software.
Note: It should take no more than 15 minutes to install the DNCS GUI and WUI
software.
1 Insert the CD labeled similar to DNCS GUI / WUI x.x.x.x into the CD drive of
software.
Note: It should take no more than 15 minutes to install the DNCS GUI and WUI
software.
1 Insert the CD labeled similar to DNCS GUI / WUI x.x.x.x into the CD drive of
the DNCS. The system automatically mounts the CD to /cdrom within 30
seconds.
seconds.
2 Type df -n and then press Enter. A list of the mounted filesystems appears.
Note: The presence of /cdrom in the output confirms that the system correctly
mounted the CD.
mounted the CD.
3 Type cd /cdrom/cdrom0 and then press Enter. The /cdrom/cdrom0 directory
becomes the working directory.
4 Type install_pkg and then press Enter. A confirmation message appears.
5 Type y and then press Enter. The software installs on the DNCS.
6 After the upgrade has completed, follow these instructions to eject the CD.
5 Type y and then press Enter. The software installs on the DNCS.
6 After the upgrade has completed, follow these instructions to eject the CD.
a Type cd / and then press Enter.
b Type eject cdrom and then press Enter.
b Type eject cdrom and then press Enter.
7 Check the log file for errors. Go to
Install Additional Software (on page 50) if the
log file indicates that the DNCS GUI and WUI software installed without error.
Notes:
Notes:
The installation log file is in the /var/sadm/system/logs directory of the
DNCS.
DNCS.
The log file for the DNCS GUI is called SAIgui_[version #]_install.log.
The log file for the DNCS WUI is called SAIwebui_[version #]_install.log.
Call Cisco Services for assistance if the log file reveals errors.