Cisco Cisco TelePresence MX700 Nota De Lançamento
Known limitations
Cisco TelePresence System C-Series Software Release Notes
Page 35 of 133
* To minimize service abruption it will be
beneficial to upgrade all systems in one go,
avoiding following the above procedure for
every endpoints you upgrade. A future TMS
version will resolve this condition negating the
need to restart the services.
Workaround to restore the release keys:
* Once TMS has restored communication with
Workaround to restore the release keys:
* Once TMS has restored communication with
the systems, upgrade the units one more time.
This time TMS will be able to communicate with
the systems when they boot up and set the
release keys.
Note: Please read the resolved caveats
Note: Please read the resolved caveats
section Reference ID 85930 as well.
Note: The above issues are fixed for TMS
Note: The above issues are fixed for TMS
13.0
CSCtr32348
TANDBERG PrecisionHD 1080p Camera
all SW versions.
720p50, 720p30 and 720p25 output has no
CRC included for HD-SDI. Depending on the
device you connect the camera to, you may not
get video using this format. The Cisco C/Ex/Mx-
Series codecs will support these formats.
N/A
Ver. TC2.1.0 and above
Startup scripts will not work with Windows end
of line. You must use Unix end of line to be able
to run multiple commands. Most editors have
the option to set which format to use. If you use
Notepad ++, you can set Unix format in the
Settings/Preferences menu.
Settings/Preferences menu.
N/A
Ver. Any
If you run cascaded cameras and the chained
cameras are running an old camera code, we
have seen that only zoom works when trying to
control the chained camera. The solution is to
connect the cascaded camera as the first
camera in the chain so that the camera is
camera in the chain so that the camera is
detected and upgraded by the codec, or use the
Ethernet upgrade method.
N/A
Ver. Any
HD-SDI may not work with cables shorter than
3 meters. This is due to a jitter issue.
N/A
Ver.Any
If you turn off H.323 as the protocol but leave
default protocol as H.323 you will be unable to
default protocol as H.323 you will be unable to
make outgoing calls unless you edit the URI to
include 'sip:' in front of the number or change
the default call protocol to SIP.
N/A
Any
1920*1200p60 output resolution will run in DVI
compatibility mode and hence audio cannot be
transmitted over HDMI when using this
transmitted over HDMI when using this
resolution.
CSCtr32423
Ver. TC3.x and above
If you dial a TANDBERG 150 with SW version
L5.1.1 or older with encryption setting set to
‘on’, you may not get audio in any direction.
CSCts34924
TC3.0.0 and above
The call status on the web interface will not be
displayed if you access the codec using
HTTPS.
HTTPS.