Cisco Cisco FirePOWER Appliance 7010
9-27
FireSIGHT System User Guide
Chapter 9 Setting Up Virtual Routers
Configuring Virtual Routers
Your changes are saved. Note that your changes do not take effect until you apply the device
configuration; see
configuration; see
Adding Export Filters for OSPF Configuration
License:
Control
Supported Devices:
Series 3
You can add an export filter to define which routes will be accepted or rejected from the route table to
OSPF. Export filters are applied in the order they appear in the table.
OSPF. Export filters are applied in the order they appear in the table.
When adding an export filter, you use one of the filters you configured on the virtual router. For more
information about configuring filters, see
information about configuring filters, see
To add an export filter for OSPF configuration:
Access:
Admin/Network Admin
Step 1
Select
Devices > Device Management
.
The Device Management page appears.
Step 2
Next to the device where you want to add the OSPF virtual router filter, click the edit icon (
).
The Interfaces tab for that device appears.
Step 3
Click
Virtual Routers
.
The Virtual Routers tab appears.
Step 4
Next to the virtual router where you want to add the OSPF virtual router filter, click the edit icon (
).
The Edit Virtual Router pop-up window appears.
Step 5
Click
Dynamic Routing
to display the dynamic routing options.
Step 6
Click
OSPF
to display the OSPF options.
Step 7
Under
Export Filters
, click the add icon (
).
The Add an Export Filter pop-up window appears.
Step 8
From the
Name
drop-down list, select the filter you want to add as an export filter.
Step 9
Next to
Action
, select
Accept
or
Reject
.
Step 10
Click
OK
.
The export filter is added.
Tip
To change the order of the export filters, click the move up (
) and move down (
) icons as needed.
You can also drag the filters up or down in the list.
Step 11
Click
Save
.
Your changes are saved. Note that your changes do not take effect until you apply the device
configuration; see
configuration; see