Cisco Cisco Content Security Management Appliance M190
9
Release Notes for Cisco IronPort AsyncOS 7.2.2 for Security Management
OL-22962-06
Known Issues
Table 5
Security Management Appliance Known Issues for 7.2.2
Defect ID
Description
78045
Compatibility issues with configuration files from AsyncOS 7.1.2 for Web
Security
Security
•
Advanced file publish cannot be used to publish a configuration file from
AsyncOS 7.1.2 for Web Security to Web Security appliances running
AsyncOS 7.1.0 or 7.1.1.
AsyncOS 7.1.2 for Web Security to Web Security appliances running
AsyncOS 7.1.0 or 7.1.1.
•
For an additional impact of this issue that affects only AsyncOS 7.2.0 and 7.2.1,
see the release notes for those versions at
see the release notes for those versions at
.
76789
After upgrading, both Feature Keys settings become enabled
Both the “Automatically Check For New Feature Keys” and “Automatically Apply
Downloaded Feature Keys” settings under Management Appliance > System
Administration > Feature Keys Settings are enabled after upgrade.
Downloaded Feature Keys” settings under Management Appliance > System
Administration > Feature Keys Settings are enabled after upgrade.
Change these settings as needed.
74487
Identities on Web Security appliance are erroneously set to “No Surrogate” when
Credential Encryption is disabled on the Security Management appliance
Credential Encryption is disabled on the Security Management appliance
When the Web Security appliance is enabled for Credential Encryption, and the
configuration master is configured to disable Credential Encryption, Identities on
Web Security appliance are erroneously set to “No Surrogate” after publishing the
configuration master.
configuration master is configured to disable Credential Encryption, Identities on
Web Security appliance are erroneously set to “No Surrogate” after publishing the
configuration master.
Workaround: After publishing the configuration master, edit each Identity that uses
authentication and change the surrogate type setting as necessary. Submit and commit
your changes.
authentication and change the surrogate type setting as necessary. Submit and commit
your changes.