Brother CM350R Guia Do Utilizador
2
Refer to “Cutting Around Drawings” in the Operation Manual to specify a seam
allowance and draw the pattern lines, and then cut out the pieces. Be sure to
observe the following instructions.
allowance and draw the pattern lines, and then cut out the pieces. Be sure to
observe the following instructions.
1
Check the fabric grain (weaving direction).
* When making pieces from patterned fabric,
the pattern has priority over the fabric grain.
* Observe the fabric grain on the pattern if it is
indicated.
2
If a seam allowance will be drawn, attach the
fabric with the wrong side facing up.
Align the lengthwise grain with the insertion
direction.
fabric with the wrong side facing up.
Align the lengthwise grain with the insertion
direction.
3
Select the patterns, and then arrange them.
If the fabric grain and pattern angle are not
aligned, rotate the pattern.
If the fabric grain and pattern angle are not
aligned, rotate the pattern.
* Pre-installed patterns will automatically be
arranged with their grain along the
lengthwise grain of the fabric.
lengthwise grain of the fabric.
4
Specify the seam allowance.
Widths that can be specified with this
machine: 3 mm, 5mm, 1/4", 7mm, 10mm,
1/2", 5/8"
Widths that can be specified with this
machine: 3 mm, 5mm, 1/4", 7mm, 10mm,
1/2", 5/8"
1 Stitching line
2 Seam allowance
2 Seam allowance
2 Cutting Pieces (Fabric)
Lengthwise-grain
fabric
Hard to stretch
Crosswise-grain
fabric
Slightly stretched
Bias-grain fabric
Easy to stretch
1 Lengthwise-
grain fabric
2 Crosswise-
grain fabric
3 Bias-grain
fabric
4 Selvage
1 Standard mat
2 High tack adhesive
2 High tack adhesive
fabric support sheet
(An additional
purchase may be
required depending
on the machine
model.)
(An additional
purchase may be
required depending
on the machine
model.)
3 Wrong side of
fabric
Standard seam allowance
Patchwork
Patchwork
5 mm (3/16"), 1/4", 7 mm
Appliqué
3 mm (1/8"), 5 mm (3/16")