Samsung RF67DERS Manual Do Utilizador

setting up 

setting up 

01

 

SETTING

 U

p

setting up your refrigerator

REASSEMblING ThE FRIdGE dOOR

1.  Insert and tighten the 

screw into the left and 
right middle hinges with a 
philips screwdriver(+).

2.  Insert and tighten the 2 hex 

head bolts into the left and 
right middle hinges with an 
allen wrench(Ø5mm).

3.  Replace the middle hinge 

cap.

4.  Place the hole in the 

bottom of the left door 
over the middle hinge.

5.  Insert the left upper hinge 

shaft into the hole on the 
corner of the fridge door.

6.  Insert the upper hinges 

into the holes at the top of 
the door. 
Insert and tighten the 3 
hex head bolts into the left 
and right upper hinges with 
a socket wrench(10mm).

7.  Insert and tighten the 

ground screw into the left 
and right upper hinges with 
a philips screwdriver(+).

8.  Connect the electronic 

wire on the top of the 
refrigerator.

9.  Position the top table in 

place. Insert and tighten 
the 3 screws into the 
top table with a philips 
screwdriver(+).

DA68-01868P.indb   17

2010.6.29   2:30:16 PM