Samsung HW-K490 Manual Do Utilizador

Expand to true wireless surround sound by connecting the Samsung Wireless 

Rear Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)

CONNECTING THE SUBWOOFER AND 

THE SWA-8000S (SOLD SEPARATELY)

If the blue LED lights do not stop blinking when the main unit, subwoofer, and SWA-8000S are turned on, please reset 

the linking ID by following the procedure below.

SURROUND SPEAKERS OUT

SPEAKER IMPED

L

R

1.  Plug the power cords of the main unit, subwoofer and the SWA-8000S into an AC wall outlet.
2.  Press the ID SET button on the back of the subwoofer and the SWA-8000S with a small, pointed object for 5 

seconds.
•

The LINK indicators (Blue LEDs) of the subwoofer and the SWA-8000S blink quickly.

3.  Press the   button on your remote control for 5 seconds while the main unit is turned OFF.
4.  The ID SET message appears on the display of the main unit for a short period of time, and then disappears.
5.  While the subwoofer's and the SWA-8000S's indicators are flashing blue, press the   button on your remote control or 

on the right side of the main unit to turn on the main unit.

6.  The connection is complete if the blue LEDs on the subwoofer and the SWA-8000S stop blinking and glow 

continuously.
•

The main unit, the subwoofer and the SWA-8000S should now be linked (connected).

The LINK indicators (Blue LEDs) on the subwoofer and the SWA-8000S should be glowing continuously and 

not blinking.

If the LINK indicators are not solid blue, the linking process has failed.Turn off the main unit, go back to Step 2, 

and start again.

You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect. (See page 8)

HW-K490_HC_ENG_Web_1027.indd   18

2016/10/27   11:15:51