Samsung RL27TDFSW Manual Do Utilizador

Página de 12
Safety information 
 
_3
compatibility that is, however, also combustible. 
When transporting and installing the appliance, 
care should be taken to ensure that no parts of 
the refrigerating circuit are damaged.
SEvERE WARNING SIGNS 
FOR INSTAllATION
•  Do not install this appliance in a humid, oily 
or dusty location, in a location exposed to 
direct sunlight and water (rain drops).
-  Deteriorated insulation of electrical parts may 
cause an electric shock or fire.
•  Do not place this refrigerator in direct sunlight or 
expose to the heat from stoves, room heaters or 
other appliances.
•  Do not plug several appliances into the same 
multiple power board. 
The refrigerator should always be plugged into 
its own individual electrical outlet which has a 
voltage rating that matched the rating plate.
-   This provides the best performance and also 
prevents overloading house wiring circuits, which 
could cause a fire hazard from overheated wires. 
If the wall socket is loose, do not insert the 
power plug.
-  There is a risk of electric shock or fire.
•  Do not use a cord that shows cracks or abrasion 
damage along its length or at either end.
•  Do not bend the power cord excessively or 
place heavy articles on it.
•  Do not use aerosols near the refrigerator.
-   Aerosols used near the refrigerator may cause 
an explosion or fire.
•  Do not install this appliance in a location where 
gas may leak.
-    This may result in an electric shock or fire.
•  The installation or any service of this 
appliance is recommended by a qualified 
technician or service company.
-  Failing to do so may result in an electric shock, 
fire, explosion, problems with the product, or 
injury.
•  This refrigerator must be properly installed and 
located in accordance with the manual before it 
is used.
•  Connect the power plug in proper position with 
the cord hanging down.
-  If you connect the power plug upside down, wire 
can get cut off and a cause fire or an electric shock.
•  Make sure that the power plug is not squashed 
or damaged by the back of the refrigerator.
•  When moving the refrigerator, be careful not to 
roll over or damage the power cord.
- This constitutes a fire hazard.
•  The appliance must be positioned so that the 
plug is accessible after installation.
• The refrigerator must be grounded.
   -  You must ground the refrigerator to
-  prevent any power leakages or electric shocks 
caused by current leakage from the refrigerator.
•   Never use gas pipes, telephone lines or other 
potential lightening rods as ground.
-  Improper use of the ground plug can result in an 
electric shock.
•  If the power cord is damaged, have it 
replaced immediately by the manufacturer 
or its service agent.
•   The fuse on the refrigerator must be changed by 
a qualified technician or service company.
-   Failing to do so may result in an electric shock or 
personal injury.
cAuTION SIGNS FOR 
INSTAllATION
•  Keep ventilation opening in the appliance 
enclosure or mounting structure clear of 
obstruction.
•  Allow the appliance to stand for 2 hours after 
installation.
SEvERE WARNING SIGNS 
FOR uSING
•  Do not insert the power plug with wet hands.
•  Do not store articles on the top of the 
appliance.
-  When you open or close the door, the articles 
may fall and cause a personal injury and/or 
material damage.
•  Do not put items filled with water on the 
refrigerator.
-  If spilled, there is a risk of fire or electric shock.
• Do not let children hang on the door.
-   Failure to do so may cause serious personal injury.
•  Do not leave the doors of the refrigerator open 
while the refrigerator is unattended and do not 
let children enter inside the refrigerator. 
•  Do not allow babies or children go inside the 
drawer.
-  It can cause death from suffocation by 
entrapment or personal injury.
•  Do not store volatile or flammable substances 
such as benzene, thinner, alcohol, ether or LP 
gas in the refrigerator.
WARNING
cAuTION
WARNING
DA99-03418A(EN)-0.0.indd   3
2011.2.1   9:57:11 AM