Samsung Conquer Manual Do Utilizador

Here is what you will need to have before you can 
successfully establish a connection between your 
Conquer 4G™ and a computer. 

䢇

microSD card (internally installed prior to start)

䢇

compatible USB cable (included)

1.

With the microSD card installed, connect your 
device to your computer using a compatible USB 
cable. (Wait for the connection to be completed. 
When connected, the host computer will 
automatically detect your device.)

2.

The USB icon (

) now appears in the top left 

Notifications area on your device.

3.

Tap 

Mass Storage

 from the 

Select USB mode

 

screen. 

䡲

Charging

 uses the connected USB cable to 

charge the device via your computer’s USB port.

䡲

Mass Storage

 uses the connected USB cable to 

provide data communication between the device 
and your computer. The device then appears as 
an external drive with its own drive letter.

䡲

Tethered Mode

 allows your computer to obtain an 

external data connection by using the device’s 
wireless data services and a wired USB 
connection. Tap 

USB tethering

 to activate tethering 

mode.

●

www.samsung.com

 and visit the D600 

Product page, where you can navigate to the 

Support

 tab to obtain this driver.

●

FAQ

 also provide detailed 

information about this driver.

●

A wireless data connection can be done by 
using the device’s Sprint Hotspot feature 
(page 158).

If you are using your device for Tethering, 
you may be prompted for additional 
drivers. 

 

The 

Samsung Mobile Driver 

for 

 

SPH-D600 contains the ADB, CDMA, & 
WiMAX drivers that are required for using 
either Tethering (Phone as a Modem) or 
development tools.

SPH-D600.book  Page 114  Thursday, June 9, 2011  10:33 AM