Samsung RH57H90307F Manual Do Utilizador

English - 44

Reverse Osmosis Water Supply 

IMPORTANT :

The pressure of the water supply coming out of a

reverse osmosis system going to the water inlet

valve of the refrigerator needs to be between 35

and 120 psi (241 and 827 kPa).

If a reverse osmosis water filtration system is

connected to your cold water supply, the water

pressure to the reverse osmosis system needs to

be a minimum of 40 to 60 psi (276 to 414 kPa.)
If the water pressure to the reverse osmosis system

is less than 40 to 60 psi (276 to 414 kPa):

•  Check to see whether the sediment filter in the

reverse osmosis system is blocked.

Replace the filter if necessary.

•  Allow the storage tank on the reverse osmosis

system to refill after heavy usage.

•  If your refrigerator has a water filter, it may

further reduce the water pressure when used

in conjunction with a reverse osmosis system.

Remove the water filter.

If you have questions about your water pressure,

call a licensed, qualified plumber.

Ordering replacement filters

To order more water filter cartridges, contact your

authorized Samsung dealer.

USING THE ICE MAKER 

(OPTIONAL)

•  To Remove the Ice Bucket.

- Hold the handle as shown in figure1.

- Lift up and pull the Bucket out slowly.

- Take out Ice Bucket out slowly to prevent

damage.

- When you reinstall the ice bucket, press and

hold the ICE button for 6 seconds.

•  Normal Operation

- Any sounds you hear when the ice maker

dumps ice into the bucket are part of normal

operation.

- Ice may clump in the bucket if you do not

dispense ice for long periods of time.

If this occurs, remove all the ice and empty the

bucket.

- If ice does not come out, check for any ice

stuck in the chute and remove it.

- The first batch of ice cubes after installation

may be small because air has entered the water

line. Any air will be purged during normal use.

ice

DA68-03015B (EN)-09.indd   44

2016. 10. 6.   �� 5:20