Samsung RS554NRUA9M SBS with Digital Inverter Technology 591 L Manual Do Utilizador

4_ safety information

•  In order to avoid the creation of a flammable gas-air mixture if a leak in the refrigerating 

circuit occurs, the size of the room in which the appliance may be sited depends on the 
amount of refrigerant used.

•  The room must be 1m

3

 in size for every 8g of R600a refrigerant inside the appliance.

•  Never start up an appliance showing any signs of damage. If in doubt, consult your 

dealer.

•  Please dispose of the packaging material for this product in an environmentally friendly 

manner

•   Do not change the pars in the refrigerator at random.

SEVERE WARNING SIGNS

•  Do not install the refrigerator in a damp place or place where it may come in contact 

with water. 
- Deteriorated insulation of electrical parts may cause an electric shock or fire.

•   Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room 

heaters or other appliance.

•  Do not place a lighted candle or open flames on the refrigerator. 

- This may result in electric shock or fire.

•  Allow sufficient space to install the refrigerator on a flat surface. 

- If your refrigerator is not level, the internal cooling system may not work correctly.

Use 220~240V power. 

Do not plug several appliances into the same multiple power 

board. The refrigerator should always be plugged into its own individual electrical which 
has a voltage rating that matched the rating plate.The refrigerator must be grounded.
- This provides the best performance and also prevents overloading house wiring 

circuits,which could cause a fire hazard from overheated wires.

•  Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and 

pull straight out from the outlet. 
- Damage to the cord may cause a short-circuit, fire and/or electric shock.

•  Make sure that the power plug is not squashed or damaged by the back of the 

refrigerator.

•  Do not bend the power cord excessively or place heavy articles on it. 

- This constitutes a fire hazard.

•

Do not use a loose socket or a cord that shows cracks or abrasion damage along its length 

or at either end.

•

 If the power cord is damaged, have it replaced immediately by the manufacturer or its 

service agent.

•  When moving the refrigerator, be careful not to roll over or damage the power cord.
•  Do not insert the power plug with wet hands.
•  Disconnect the power before cleaning or maintaining your refrigerator. 

- Do not use a wet or damp cloth when cleaning the pulug.

•  Remove any foreign matter or dust from the power plug pins. 

- Otherwise there is a risk of fire.

•  If the refrigerator is disconnected from the power supply, you should wait for at least ten 

minutes before plugging it back.

• 

 If the wall socket is loose, do not insert the power plug. 

- There is a risk of electric shock or fire.

• 

 The appliance must be positioned so that the plug is accessible after installation.

•   Do use separate and reliable earthing power. Don’t share a socket with other 

appliances. In order to ensure safety, the socket and its connecting wire must be able to 
bear over 10A current. 

safety information