Samsung SNT-1010P Manual Do Utilizador
79
Chapter 9 Appendix
Network Configuration/Resetting the System
78
Appendix
Setting Up
Resetting the System
Network Configuration
(Continued)
To set DDNS
DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of an SNT-1010
into a general Host Name so that the user can easily remember it and enables connecting an SNT-1010
with a fixed Host Name even if the IP address of the SNT-1010 may be dynamically changed.
into a general Host Name so that the user can easily remember it and enables connecting an SNT-1010
with a fixed Host Name even if the IP address of the SNT-1010 may be dynamically changed.
If Samsung’s DDNS service is selected, the Host Name is automatically generated using
the SNT-1010 MAC address.
A SNT-1010 MAC address consists of <One among from lower-case alphabet characters of
e, m and p> + <Last 6 digits of the MAC address> + <websamsung.net>.
The lower-case alphabet letter becomes <e> if the first 6 digits of the MAC address is
<00:00:f0>, <m> if <00:16:6c>, and <p> if <00:68:36>.
the SNT-1010 MAC address.
A SNT-1010 MAC address consists of <One among from lower-case alphabet characters of
e, m and p> + <Last 6 digits of the MAC address> + <websamsung.net>.
The lower-case alphabet letter becomes <e> if the first 6 digits of the MAC address is
<00:00:f0>, <m> if <00:16:6c>, and <p> if <00:68:36>.
Example) - If the MAC address of SNT-1010 is 00 : 00 : f0 : ff : fe : 42 :
e + fffe42 + websamsung.net = efffe42.websamsung.net
- If the MAC address of SNT-1010 is 00 : 16 : 6c : ff : fe : 42 :
m + fffe42 + websamsung.net = mfffe42.websamsung.net
- SIf the MAC address of SNT-1010 is 00 : 68 : 36 : ff : fe : 42 :
p + fffe42 + websamsung.net = pfffe42.websamsung.net
To use another DDNS service, sign up a DDNS site that is supported by an SNT-1010 and
use it with the user ID and password you have specified when you sign up the site.
For information about how to sign up another DDNS and setup Host Name, please visit the
corresponding DDNS service website and ask about that.
use it with the user ID and password you have specified when you sign up the site.
For information about how to sign up another DDNS and setup Host Name, please visit the
corresponding DDNS service website and ask about that.
Click <NETWORK>
<DDNS>.
The DDNS window appears.
You can initialize all settings of this product when it
does not work properly or causes a problem.
does not work properly or causes a problem.
Press and hold the [FACTORY RESET] button on the rear panel of the product for 3 seconds and
release it when the [STATUS] indicator blinks 3 times.
release it when the [STATUS] indicator blinks 3 times.
The [STATUS] LED turns green and the system restarts when all the settings are initialized.
Since if the product is reset, all settings are initialized, you must configure basic network settings such as IP Address, Subnet
Mask, Gateway, etc., using the <IP Installer.exe> program.
Notice
You can reset the system even from a remote location by selecting <SYSTEM>
<RESET>.
Note