Samsung SL-M3065FW Manual Do Utilizador
Wired network setup
143
2. Using a Network-Connected Machine
DHCPv6 address configuration from
the control panel
If you have a DHCPv6 server on your network, you can set one of the following
options for default dynamic host configuration.
1
Press the
(Menu) button on the control panel.
2
Press Network > TCP/IP (IPv6) > DHCPv6 Config
3
Press OK to select the required value you want.
•
Router: Use DHCPv6 only when requested by a router.
•
Always Use: Always use DHCPv6 regardless of router request.
•
Never Use: Never use DHCPv6 regardless of router request.
Activating IPv6 from SyncThru™ Web Service
1
Access a web browser, such as Internet Explorer, from Windows. Enter
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click Go.
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click Go.
2
If it’s your first time logging into SyncThru™ Web Service you need to log-
in as an administrator. Type in the below default ID and password. We
recommend you to change the default password for security reasons.
in as an administrator. Type in the below default ID and password. We
recommend you to change the default password for security reasons.
•
ID: admin
•
Password: sec00000
3
When the SyncThru™ Web Service window opens, move the mouse
cursor over the Settings of the top menu bar and then click Network
Settings.
cursor over the Settings of the top menu bar and then click Network
Settings.
4
Click TCP/IPv6 on the left pane of the website.
5
Check the IPv6 Protocol check box to activate IPv6.
6
Click the Apply button.
7
Turn the machine off and turn it on again.
•
You can also set the DHCPv6.
•
To manually set the IPv6 address:
Check the Manual Address check box. Then, the Address/Prefix text
box is activated. Enter the rest of the address
(e.g.,:3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A
through F).
Check the Manual Address check box. Then, the Address/Prefix text
box is activated. Enter the rest of the address
(e.g.,:3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A
through F).