Samsung BD-H5500 Manual Do Utilizador
By USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com/
bluraysupport.
2. Download the latest USB software
upgrade zip archive to your computer.
3. Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
4. Copy the RUF file to a USB flash drive.
5. Make sure there is no disc in the player,
5. Make sure there is no disc in the player,
and then insert the USB flash drive into
the USB port of the player.
6. In the player’s menu, go to Settings >
Support > Software Upgrade.
7. Select By USB.
✎
NOTES
■
No disc should be in the product
when you upgrade the software
using the USB Host jack.
■
When the software upgrade is
done, check the software details in
the software Upgrade menu.
■
Do not turn off the player during the
software upgrade. It may cause the
player to malfunction.
■
Software upgrades using the USB
Host jack must be performed with a
USB flash memory stick only.
Auto Upgrade Notification
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version
is available for the player.
To set Auto Upgrade Notification on,
follow these steps:
1. Select Auto Upgrade Notification, and
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version
is available for the player.
To set Auto Upgrade Notification on,
follow these steps:
1. Select Auto Upgrade Notification, and
then press the v button.
2. Use the ▲▼ buttons to select On, and
then press the v button.
If there is a new software version available,
the player notifies you with a popup
message.
1. To upgrade the firmware, select Yes
the player notifies you with a popup
message.
1. To upgrade the firmware, select Yes
in the Pop-up. The player turns off
automatically, then restarts, and begins
the download. (Never turn the player
on or off manually during an upgrade.)
2. The update progress popup appears.
3. When the update is complete, the
3. When the update is complete, the
player turns off again automatically.
4. When the update is completed, the
player will restart automatically.
✎
NOTES
■
The upgrade is complete when the
player turns off, and then turns on
again by itself.
■
Never turn the player off or on
manually during the update process.
■
Samsung Electronics takes no legal
responsibility for player malfunction
caused by an unstable Internet
connection or consumer negligence
during software upgrade.
Contact Samsung
Provides contact information for assistance
with your player.
with your player.
Terms of Service Agreement
Lets you view the general disclaimer
regarding third party contents and
services.
regarding third party contents and
services.
Reset
Returns all settings to their factory defaults
except for the network settings.
except for the network settings.
Media Play
Playing a Commercially Recorded
Disc
1. Press the 8 button to open the disc
tray.
2. Place a disc gently into the disc tray
with the disc's label facing up.
3. Press the 8 button to close the disc
tray. Playback starts automatically.
Playing Files on a USB Device
There are two methods you can use to
play or view multimedia files located on a
USB device through your player.
play or view multimedia files located on a
USB device through your player.
Method 1
1. Turn the player on.
2. Connect the USB device to the USB
2. Connect the USB device to the USB
port on the front panel of the player.
The New Device Connected pop-up
appears.
App 1 App 2 App 3 App 4 App 5 More Change Device Settings
Play disc
Photos
Videos
Music
No disc
New device connected.
Photos
Videos
Music
123
> Move " Enter ' Return
✎
NOTES
■
If the pop-up does not appear, go to
Method 2.
Method 2.
3. Use the ▲▼ buttons to select Photos,
Videos or Music, and then press
the v button. The Photos, Videos
& Music screen appears listing the
content of the device. Depending on
how the contents is arranged, you will
see either folders, individual files, or
both.
✎
NOTES
■
Even though the player will display
folders for all content types, it will
only display files of the Content Type
you selected in Step 3. For example,
if you selected music, you will only
be able to see music files. You can
change this selection by returning to
the Photos, Videos & Music screen
and going to Step 3 in Method 2
below.
4. If necessary, use the ▲▼▲▼◀▶
buttons to select a folder, and then
press the v button.
press the v button.
5. Select a file to view or play, and then
press the v button.
6. Press the RETURN button to exit a
folder or the EXIT button to return to
the Home screen.
7. Go to pages 17~19 for instructions
that explain how to control playback of
videos, music, and pictures on a USB
device.
videos, music, and pictures on a USB
device.
15