Samsung 1,000 W 5.1Ch Blu-ray Home Entertainment System H6550 Manual Do Utilizador

 - English

Settings

7. 

Select the IP setting field, and then set it to 
Enter manually.

8. 

Select a network parameter to enter (IP 
Address, for example), and then press 

OK

 

button. Use the ,. buttons on the remote 
control to enter the numbers for the parameter. 
Or use the Num keypad to enter a parameter 
number.

Press and hold the 123 button until the 

Num pad appears on the screen. When the Num 
pad appears, select a number using the ,.

 

button and then press the 

OK

 button.Use the 

 buttons on the remote control to move from 

entry field to entry field within a parameter. When 
done with one value, press the 

OK

 button.

9. 

Press the , or . button to move to another 
parameter, and then enter the numbers for that 
parameter following the instructions in Step 8.

10.  Repeat Steps 8 and 9 until you have filled in all 

parameters.

 

✎

You can get the Network parameter values from 
your Internet provider.

11.  When finished, select OK, and then press the 

OK

 button. The Security screen appears.

12.  On the Security screen, enter your network's 

security code or pass phrase. Enter letters by 
selecting a letter with the ,.

 buttons, and 

then pressing the 

OK

 button.

13.  When finished, select Done at the right of the 

screen, and then press the 

OK

 button. The 

product verifies the network connection and 
then connects to the network.

14.  After the home cinema verifies the network, 

select OK, and then press the 

OK

 button.

 

✎

You can also begin the Manual Network setup by  
going to Settings > Network > Network Status.

 

WPS(PBC)

One of the easiest ways to set up the wireless 
network connection is using the WPS(PBC) function. 
If your wireless router has a WPS(PBC) button, follow 
these steps:

After following Steps 1 to 3 in "Configuring Your 
Network Connection" on page 21:

1. 

In the Network Settings screen, change 
Network type to Wireless. The product 
searches for and then displays a list of the 
available networks.

2. 

Scroll the list down, select WPS(PBC), and then 
press the 

OK

 button.

3. 

Press the WPS(PBC) button on your router 
within two minutes. Your product automatically 
acquires all the network settings values it needs 
and connects to your network after the network 
connection is verified.

4. 

 When it is done, highlight OK, and then press 
the 

OK

 button.

 

✎

 For a WPS connection, set your wireless router’s 
security encryption to AES. WEP security 
encryption does not support a WPS connection.

 The Wi-Fi Direct function allows you to connect 
Wi-Fi Direct devices to the product and each other 
using a peer-to-peer network, without a wireless 
router.

 

✎

Some Wi-Fi Direct devices may not support the 
AllShare function if connected via Wi-Fi Direct. If 
this is the case, change the network connection 
method you used to connect the device to the 
home cinema.

 

✎

Wi-Fi Direct transmissions can interfere with 
Bluetooth signals. Before you use the Bluetooth 
function, we strongly recommend that you turn off 
the Wi-Fi Direct function on any device in which 
it is currently on.

1. 

Turn on the Wi-Fi Direct device and activate its 
Wi-Fi Direct function.

2. 

In the Home screen, select Settings, and then 
press the 

OK

 button.

3. 

Select Network, and then press the 

OK

 button.

4. 

Select Wi-Fi Direct, and then press the 

OK

 

button. 
The Wi-Fi Direct devices that you can connect 
the home cinema to appear.

Refresh

Wi-Fi Direct

Device Name : [HTS]H6550WM

Select your Wi-Fi Direct device to connect to.

AndroidXXXXXXX

Disconnected

Close

Settings

HT-H6550WM-XY-0519.indd   23

HT-H6550WM-XY-0519.indd   23

2014-05-19     4:22:07

2014-05-19     4:22:07