Samsung 1,000 W 5.1Ch Blu-ray Home Entertainment System H6550 Manual Do Utilizador

- English

Appendix

Symptom

Check/Remedy

The menu screen does
not appear even when you
select the menu function.

• Are you using a disc that does not contain menus?

The aspect ratio cannot be
changed.

• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or 4:3

Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 mode only. Refer to
the Blu-ray Disc jacket, and then select the appropriate function.

• The product is not

working.
(Example: The power
goes off or you hear a
strange noise.)

• The Product is not

working normally.

• Press and hold the remote control's

e (EXIT) button for 5 seconds in STANDBY

mode. This will reset the unit.

- Using the RESET function will erase all stored settings.

Do not use this function unless necessary.

You have forgotten the
rating level password.

• With no disc in the product, press and hold the product's @ button for longer than

5 seconds. INIT appears on the display and all settings will return to their default
values.

- Using the RESET function will erase all stored settings.

Do not use this function unless necessary.

Can't receive radio
broadcasts.

• Is the antenna connected properly?

• If the antenna's input signal is weak, install an external FM antenna in an area with

good reception.

While listening to TV audio
through the product, there
is no sound.

• If you press the OPEN/CLOSE ^ button while listening to TV audio using the

D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV
audio is muted.

"Not Available" appears on
screen.

• The features or action cannot be completed at this time because:

1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.

If the HDMI output is set to
a resolution your TV cannot
support (for example,
1080p), you may not see a
picture on your TV.

• Press and hold the @ button on front panel for more than 5 seconds with no disc

in the product. All settings will revert to their factory settings.

No HDMI output.

• Check the connection between the TV and the HDMI jack of the product.

• Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.

Abnormal HDMI output
appears on the screen.

• If random noise appears on the screen, it means that TV does not support HDCP

(High-bandwidth Digital Content Protection).

HT-H6550WM-XY-0519.indd 59

2014-05-19 4:24:12