Samsung HW-H500 Manual Do Utilizador

FUNCTIONS

 You can enjoy TV sound through your SoundStand when it is connected to a Samsung TV that supports the 
TV SoundConnect function.

+  Connecting a TV to the SoundStand

 

1.   Turn on the TV and SoundStand.

•   Set the "Add New Device" menu selection of 

the TV to "On".

2.   Press the (      ) button on the main unit’s top panel 

or the Soundconnect button on the remote 
control to select the TV mode.
•  The        LED will blink indicating that TV is not 

connected yet.

3.   On the TV, a message asking whether to enable the 

TV SoundConnect function appears. "[Samsung] 
SoundStand" is displayed on the TV screen.

4.   Select <Yes> using the TV remote to finish 

connecting the TV and SoundStand.
•   The       LED will stop blinking when TV is 

successfully connected.

 

●  Switching the SoundStand’s mode from TV 

to another automatically terminates TV 
SoundConnect.

●  To connect the SoundStand to another TV, 

the existing connection must be terminated.

●  Terminate the connection to the existing TV, 

then press the Soundconnect button on the 
remote control for 5 seconds to connect to 
another TV.

 

 

●  The TV SoundConnect (SoundShare) function 

is supported by some Samsung TVs released 
from 2012 on. Check whether your TV 
supports the TV SoundConnect (Soundshare) 
function before you begin. (For further 
information, refer to the TV’s user manual.)

●  If your Samsung TV was released before 

2014, check the SoundShare setting menu.

●  If the distance between the TV and 

SoundStand exceeds 5m, the connection 
may not be stable or the audio may stutter. 
If this occurs, relocate the TV or SoundStand 
so that they are within operational range, 
and then re-establish the TV SoundConnect 
connection.

 

 

●  TV SoundConnect Operational Range

-

 Recommended pairing range: within 
50cm.

-

 Recommended operational range: 
within 5m.

 

+   Using the Bluetooth POWER On 

 The Bluetooth POWER On function is available after 
you have successfully connected the SoundStand to 
a Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON, 
turning the connected TV on or off will turn the 
SoundStand's power on and off as well.

1.   Connect the TV with your SoundStand using the 

TV SoundConnect function.

2.   Press the Bluetooth POWER button on the 

SoundStand remote. The GREEN        ,                 
and,       LEDs appear on the SoundStand's 
display.
•   GREEN        : The SoundStand turns on or off 

when you turn the TV on or off.

•   RED        : The SoundStand  turns off when 

you turn the TV off.

 

 

●  This function is supported only by some 

Samsung TVs released from 2013 on.

●  If the SoundStand is connected to a TV 

through TV SoundConnect, and you turn 
the SoundStand off by turning off the TV, 
the Bluetooth Power function will not turn 
the SoundStand on, even if you connect 
another Bluetooth device to it.