Samsung HT-J4500 Manual Do Utilizador
40
- English
Appendix
Symptom
Check/Remedy
If the HDMI output is set to
a resolution your TV cannot
support (for example,
1080p), you may not see a
picture on your TV.
• Press and hold the 5 button on front panel for more than 5 seconds with no disc
in the product. All settings will revert to their factory settings.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output
appears on the screen.
• If random noise appears on the screen, it means that TV does not support HDCP
(High-bandwidth Digital Content Protection).
DLNA function
You can see folders shared
You can see folders shared
through DLNA, but cannot
see the files.
• DLNA shows only Photo, Music, and Movie files. It does not display other kinds of
files.
Video plays intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is overloaded.
The DLNA connection
between the TV and PC is
unstable.
• IP addresses under the same subnetwork should be unique, otherwise IP collision
can cause an unstable connection.
• Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
The home cinema cannot
The home cinema cannot
connect to the BD-LIVE
server.
• Test whether the network connection is active by using the Network Status
function.
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in
BD Data Management. (See page 32)
• See if the BD-Live Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the latest firmware.
When using the BD-LIVE
service, an error occurs.
• The USB memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in
BD Data Management. (See page 32)
✎
When the factory default settings are restored, all stored user BD data is deleted.
HT-J4500_EN-ENG_0206.indd 40
2015/2/6 10:51:07