Samsung RF62QERS Manual Do Utilizador
setting up
_19
01
SETTING
UP
ADJUSTING THE DOORS
After putting the doors back on the Refrigerator,
make sure the Refrigerator is level so that you can
make final adjustments.
If the Refrigerator is not level, it will not be possible
to get the doors perfectly even.
Also it is possible to sweat in the refrigerator and ask
more energy bills.
make sure the Refrigerator is level so that you can
make final adjustments.
If the Refrigerator is not level, it will not be possible
to get the doors perfectly even.
Also it is possible to sweat in the refrigerator and ask
more energy bills.
For example, when the left side is lower than the
right side, insert a flat-blade screwdriver into a notch
on the left control lever, and turn it clockwise or
counter clockwise to level the door.
Turning it clockwise to raise the refrigerator and
counterclockwise to lower it.
For the left side is higher, do it with right lever.
right side, insert a flat-blade screwdriver into a notch
on the left control lever, and turn it clockwise or
counter clockwise to level the door.
Turning it clockwise to raise the refrigerator and
counterclockwise to lower it.
For the left side is higher, do it with right lever.
Both control levers must be surely touching
the floor to avoid the possible personal injury
or property damage because of tipping.
the floor to avoid the possible personal injury
or property damage because of tipping.
Clean the ice box if there are some small pieces of ice on the bottom.
Throw away the coherent ice if the ice maker is not used for long time.
Set “Ice Off” for saving energy if the ice
maker will not be used for long time.
maker will not be used for long time.
If you want to buy and use a tool of shoveling
ice,put it into special place of ice box or take
it out.
ice,put it into special place of ice box or take
it out.
YES
NO
NO
YES
CAUTION
There is protective film on the surface of some
refrigerator models, which is used to protect the
refrigerator from scratches during transport. To avoid
static electricity, please peel off the protective film
slowly. If the protective film is not removed for a long
time, it may cause color shading of the steel plate.
refrigerator models, which is used to protect the
refrigerator from scratches during transport. To avoid
static electricity, please peel off the protective film
slowly. If the protective film is not removed for a long
time, it may cause color shading of the steel plate.
Do not apply strong shock or excessive force onto
the surface of glass.
-Broken glass may result in a personal injury and/or
property damage.
the surface of glass.
-Broken glass may result in a personal injury and/or
property damage.
CAUTION
CAUTION
When the left
side is lower.
side is lower.
When the left
side is higher.
side is higher.
Screwdriver(-)
Control Lever
Screwdriver(-)
CAUTION