Samsung Mondi Guia Da Instalação

Página de 158
99
2.
Flip through the currently open applications and center the 
desired application on the screen. Selected applications 
display their name above the image.
3.
Touch either End (to terminate the current app) or End All 
(to close all background applications). 
4.
Touch the Display icon (bottom-right) to change the way 
the currently active applications are displayed. 
• Options are: Horizontal List or Vertical Grid.
Note: The Multimedia Player can be launched directly from the TaskSwitcher 
(bottom Left of screen).
ROUTE 66 Navigation
ROUTE 66™ is a ready-to-use navigation solution that comes 
complete with built-in voice-guided 3D GPS navigation based on 
your current location. Mondi utilizes its built-in GPS hardware to 
work in tandem with the ROUTE 66 software and provide you 
real-time and accurate map information, including access to 
digital maps with POIs (Points Of Interest). The application is 
loaded onto the Mondi DVD and must be installed from your 
computer, to a connected Mondi device. The included maps can 
be loaded to either the device’s built-in storage space or to an 
optional microSD card. 
Note: Once installed, the maps are associated to your Mondi. If these maps 
were installed onto a microSD and then inserted into another device, 
they would not function as they are registered to the specific Mondi on 
which they were installed.
Installing the Application and Maps
If you have already setup an ActiveSync connection between your 
Mondi and your computer, you will have to make a small 
modification to your ActiveSync settings prior to disc installation 
to prevent any conflicts during setup. These setup procedures 
are based on the usage of the ActiveSync 4.5 application.
1.
Prior to setup, make sure your Mondi has access to the 
Internet as this is necessary to complete the setup and 
Important!: To install the maps onto your microSD card you will need a card 
with at least 1GB of available space (2GB microSD card or 
greater is recommended).
2.
When installing the maps to the card, you will need to 
establish a direct USB Mass Storage connection (vs 
ActiveSync).
• From the Today screen, touch Start (
> Settings.
SWD-M100.book  Page 99  Friday, March 5, 2010  5:49 PM