Samsung Mondi Manual Do Utilizador

Basics       24

When you setup an automatic lock on your device, it requires a 
password be entered prior to returning to normal operation. 
When a password is set up, the device can be locked 
immediately upon command, configured to lock after a specified 
period of inactivity, or after the LCD blanks out.

From the Today screen, touch Start > Settings.

Touch the Personal tab and tap Lock (

).

Set up a timeout value by touching the Prompt if device 

unused for field then use the drop-down list to select a 

value (amount of unused time required before you are 

prompted for a password if the device becomes idle). 

Enabling this option activates the remaining fields.

Touch the Password type field and enter the desired 

information:

• Simple  PIN: must be at least four characters in length and cannot 

contain a simple sequence such as 0000, 1111, or 1234.

• Strong alphanumeric: must be at least seven characters in length 

and must contain at least one character from each of the following 
categories: uppercase/lowercase letters, numerals, and symbols. 
Examples of strong alphanumeric passwords are sb?8A!3 and 
%$VH5hW.

Touch the Password field then use the QWERTY keyboard 

to enter the desired password.

Touch the Confirm password field then use the QWERTY 

keyboard to re-enter the same password.

Touch 

 to save your password.

Touch Yes to confirm your selection.

One method of making sure you don’t accidentally forget your 
new password is to use the Hint feature.

From the Today screen, touch Start > Settings.

Touch the Personal tab and tap Lock (

).

Note: If you have previously created your password, you are prompted to 

touch the onscreen password filed, use the QWERTY keyboard to enter 
your password, then touch Unlock before you can make any updates or 
changes. 

Touch the onscreen Hint tab and use your QWERTY 

keyboard to enter a hint for your password into the dialog 

box.

SWD-M100.book  Page 24  Monday, March 8, 2010  8:09 AM