Samsung MN910 Bluetooth Headset Manual Do Utilizador

Using the headset

9

To ensure you get the best performance from the headset:

•  Do not block or create a barrier between the devices. Human body can interfere with the 

Bluetooth signal.

•  Do not touch the transmitting/receiving part of the connected device.
•  When pairing the headset with other devices, place the devices close together. 

Depending on the user environment, noise problem or malfunction might occur.

•  Bluetooth uses the same frequency as low power devices, such as industrial, scientific, 

medical devices, electronic devices or wireless LANs. Move the headset away from these 
devices, as they may interfere with each other.

•  To improve range, use the headset in places without intervening obstacles. Obstacles 

such as walls, corners or furniture weaken the signal.

•  When calling through the headset, sound quality might drop, as the distance from 

the connected mobile device increases. If two devices are too far from each other, the 
connection is lost and the call is transferred to the mobile device.

•  Conversation might be interrupted when calling in a loud environment, such as outside 

or where there is a lot of background noise.

Some devices, especially those that are not tested or approved by Bluetooth SIG, may 
not be compatible with the headset.

When using a new mobile device, you need to pair it with the headset. Once pairing is 
complete, the headset attempts to reconnect each time you turn it on. For Pairing and while 
in use, the two devices must be placed close together.

1 

With the headset turned on, press and hold the Talk button for 3 seconds to enter Pairing 
mode. The indicator light flashes blue and red for 3 minutes.

2 

Activate Bluetooth on the mobile device, scan for the device, and then select the headset 
name “EO-MN910” from the list of available devices. For more details, refer to the mobile 
device’s user manual.