Samsung Galaxy S6 Active Manual Do Utilizador
4
Assemble Your Device
Getting Started
Assemble Your Device
This section helps you to
assemble your device.
Install the Nano SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card. During activation,
your SIM card is loaded with your subscription
details, such as your Personal Identification Number
(PIN), available optional services, and other
features.
provided with a plug-in SIM card. During activation,
your SIM card is loaded with your subscription
details, such as your Personal Identification Number
(PIN), available optional services, and other
features.
Warning: Please be careful when handling the
SIM card to avoid damaging it. Keep all SIM cards
out of reach of small children.
SIM card to avoid damaging it. Keep all SIM cards
out of reach of small children.
Caution: Exercise care when using the removal tool to
eject the internal SIM card tray.
eject the internal SIM card tray.
1. Carefully pull the SIM card tray out of the slot.
2. Place the SIM card on the tray.
•
Make sure that the card’s gold contacts face
down into the device and that the card is
positioned as shown.
down into the device and that the card is
positioned as shown.
3. Slide the SIM card tray back into the slot.
Caution: If the SIM card is not inserted correctly, the
device cannot detect it. Reorient the SIM card and
place it back into the slot if it is not detected.
device cannot detect it. Reorient the SIM card and
place it back into the slot if it is not detected.
Maintaining Water and Dust
Resistance
Resistance
This device is rated IP67 using the Ingress
Protection rating system.
Protection rating system.
Your device has been tested in a controlled
environment and shown to be water and dust
resistant in certain circumstances (meets
requirements of classification IP67 as described by
the international standard IEC 60529 - Degrees of
Protection provided by Enclosures [IP Code]; test
conditions: 15-35°C, 86-106 kPa, 1.0 meter, for 30
minutes). Despite this classification, your device is
not impervious to water damage in any situation. It is
important that all compartments are closed tightly.
environment and shown to be water and dust
resistant in certain circumstances (meets
requirements of classification IP67 as described by
the international standard IEC 60529 - Degrees of
Protection provided by Enclosures [IP Code]; test
conditions: 15-35°C, 86-106 kPa, 1.0 meter, for 30
minutes). Despite this classification, your device is
not impervious to water damage in any situation. It is
important that all compartments are closed tightly.
Follow these tips carefully to prevent damage to the
device.
device.
•
Whenever your device gets wet, dry it thoroughly
with a clean, soft cloth.
with a clean, soft cloth.
•
Do not expose the device to salt water or ionized
water, or to water over 1.0 meter deep for more
than 30 minutes. If your device is exposed to
fresh water, dry it thoroughly with a clean, soft
cloth. If the device is exposed to any liquid other
than fresh water, rinse the device with fresh water
immediately and dry it thoroughly with a clean,
soft cloth. Failure to rinse the device in fresh water
and dry it as instructed may cause the device to
suffer from operability or cosmetic issues.
water, or to water over 1.0 meter deep for more
than 30 minutes. If your device is exposed to
fresh water, dry it thoroughly with a clean, soft
cloth. If the device is exposed to any liquid other
than fresh water, rinse the device with fresh water
immediately and dry it thoroughly with a clean,
soft cloth. Failure to rinse the device in fresh water
and dry it as instructed may cause the device to
suffer from operability or cosmetic issues.
•
Do not expose the device to water at high
pressure.
pressure.
•
If the device is dropped or receives an impact,
the water and dust resistant features of the device
may be damaged.
the water and dust resistant features of the device
may be damaged.
•
The touchscreen and other features may not work
properly if the device is used in water or in other
liquids. [040616]
properly if the device is used in water or in other
liquids. [040616]