Samsung Galaxy Mega Manual Do Utilizador

Rename or Unpair a Paired Device 

Unpair a paired device to break the connection between the 
device and your phone, but retain the knowledge of the 
pairing. At a later point when you want to reconnect the 
device, there is no need to setup the connection 
information again. 

Note: Disconnections often occur automatically if the 

paired device goes out of range of your phone or it 
is powered off. Upon reconnection, you may be required 
to re-enter all the previous pairing information. 

1.  Verify your Bluetooth is active. 

2.  From the Bluetooth settings screen, touch

 next to 

the previously paired device. This opens the connected 

device’s menu options. 

3.   Touch Rename to change the name of the paired 

device. 

4.  Touch Unpair to unpair from the paired device. 

Depending on your paired devices’ settings and capabilities, 
you may be able to send photos, Contact information, or 
other items using a Bluetooth connection. 

Note: Prior to using this feature, Bluetooth must first be 

enabled, and the recipient’s device must be visible. 

1.  Verify your Bluetooth is active. 

2.  From the Home screen, touch 

. 

Touch 

Menu ➔ Share namecard via. 

4.   Touch each contact that you would like to send via 

Bluetooth. A green check mark will appear next to each 

entry you select. 

5.   Touch Done. 

6.   Touch Bluetooth. 

7.  Select the paired device to send the contacts to. 

Note: The external Bluetooth device must be visible and 

communicating for the pairing to be successful. 

A Bluetooth share notification will appear in your 
notifications list. 

Connections  

116