Samsung SMO-150QP Manual Do Utilizador

Function: Sets the display date format and current time.

Setting method :Move to #2. DATE/TIME MENU by using œ

œENTER√

√ SWITCH at setup menu,

then press the ENTER SWITCH to display the OSD as shown in the below figure. 

(The figure shows the initial setting status.)

Move to the format item by turning œ

œENTER√

√ SWITCH, and enter the mode for setting date 

format by pressing the ENTER SWITCH.

At this time, select a target date format by turning left and right the SWITCH.

(“YY/MM/DD”, “MM/DD/YY”, “DD/MM/YY” are available for selectable data format.)

Repeat the above instruction for moving to each item (MONTH, DAY, YEAR, HOUR, MINUTE, 

SECOND) and entering the mode. Current date and time to display can be set. (It can be referred 

when ALARM or LOSS occurs.)

Function : Displays each picture for pre-set time and automatically switches it to the next picture 

at SEQUENTIAL DISPLAY MODE. 

Setting method : Move to #3. DWELL TIME menu by using œ

œENTER√

√ SWITCH at SETUP 

MENU, and press the ENTER SWITCH to display the following OSD as shown  in the below

figure. (The figure shows the initial setting status.)

If the time is set for each camera channel by using œ

œENTER√

√ SWITCH, each camera picture will be

displayed for the set time and switched to the next picture automatically.

06/01/03

13:14:00

DATE TYPE

MM/DD/YY

DATE

06 / 01 / 03

TIME [HH:MM:SS]

13 : 14 : 00

06/01/03

13:14:00

CAM1

01 SEC

CAM2

01 SEC

CAM3

01 SEC

CAM4

01 SEC

CAM5

01 SEC

CAM6

01 SEC

CAM7

01 SEC

CAM8

01 SEC

QUAD-A

01 SEC

QUAD-B

01 SEC

English-38