Samsung QM98F Manual Do Utilizador
17
Reverse Side
― The color and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
DP IN 1
(UHD 60Hz)
RJ45
RS232C IN
DVI/PC/
MAGICINFO IN
HDMI IN 4
HDMI IN 3
HDMI IN 2
HDMI IN 1
DP IN 2
(UHD 60Hz)
IR OUT
IR IN
RS232C
OUT
DVI/PC/
HDMI/
AUDIO IN
AUDIO OUT
SERVICE
Port
Description
RS232C IN
Connects to MDC using an RS232C adapter.
DVI/PC/MAGICINFO IN
DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.
PC: Connects a D-SUB cable (via a DVI-RGB adapter) or a DVI-RGB cable to a
PC.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
PC: Connects a D-SUB cable (via a DVI-RGB adapter) or a DVI-RGB cable to a
PC.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
HDMI IN 1, HDMI IN 2, HDMI IN 3,
HDMI IN 4
HDMI IN 4
Connects to a source device using a HDMI cable or HDMI-DVI cable.
― Obtain sharp picture quality when viewing UHD content at 30Hz.
DP IN 2 (UHD 60Hz)
Connects to a PC using a DP cable.
― Obtain sharp picture quality when viewing UHD content at 60Hz.
DP IN 1 (UHD 60Hz)
RJ45
Connects to MDC using a LAN cable.
RS232C OUT
Connects to MDC using an RS232C adapter.
IR IN
Supplies power to the external sensor board or receives the light sensor signal.
IR OUT
Receives the remote control signal via the external sensor board and outputs
the signal via LOOP OUT.
the signal via LOOP OUT.
SERVICE
Connects to a USB device when upgrading software.
DVI/PC/HDMI/AUDIO IN
Receives sound from a PC via an audio cable.
AUDIO OUT
Connects to the audio of a source device.