Samsung RF26HFENDSG/AP Manual Do Utilizador

English - 23

SETTING UP

CONNECT THE WATER LINE 
TO THE FRIDGE

•  Connect the plastic line on the back of your 

fridge to the cartridge holder outlet (fully insert 
the plastic line to the cartridge holder outlet).

•  Insert plastic clip to the cartridge holder inlet 

and outlet.

•  Turn water on and check for any leakage.

•  You can purchase the necessary fi lter 

cartridge at the retailer where you 
purchased this refrigerator. 

•  The water line must be connected to 

drinkable water only

•  A compression fi tting and nut kit is 

supplied with the unit and it is inside the 
fridge drawer.

•  When pushing the Refrigerator back, 

make sure you don’t roll over the power 
cord or water line(Icemaker supply line)

TO USE WITHOUT THE WATER 
FILTER

Connecting to the water supply line

•  Shut off the main water supply line and turn 

the Ice maker to the off position.

•  Locate the nearest cold water drinking line.

1

2

3

4

5

6

7

1.  Cold Water line
2.  Pipe Clamp.
3.  Plastic line
4.  Compression Nut
5.  Compression Sleeve
6.  Packing Nut.
7.  Shut Off Valve

Connect the water line to the fridge

Compression 
Nut (Provided) 

Ferrule 

(Purchased)

Plastic Tubing

(Provided)

Compression 
Fitting (Provided)

Compression 
nut (Purchased)

Bulb

or

Copper tubing
(Not supplied)

Plastic tubing
(Not supplied)

Household water line

Refrigerator

1.  Slip the compression nut through the plastic 

tubing.

2.  After inserting the compression nut into plastic 

tubing, tighten the compression nut onto 1/4” 
compression fi tting(Provided).

DA68-02601F-00.indb   23