Samsung RF26NBSH Manual Do Utilizador

Connecting to the water supply line

1. First, shut off the main water supply line.
2. Locate the nearest cold, drinking water line.
3.  Follow the Water line Installation Instructions in the 

installation kit.

The water line must be connected 

to the cold water pipe. If it is 

connected to the hot water 

pipe, it may cause the purifier to 

malfunction.

4.  After connecting the water supply to the water filter, turn your main water supply back on and 

dispense about 3L to clear and prime the water filter.

Connecting the water line to the refrigerator

1.  Remove the cap from water line on the unit and insert compression nut to the water line on the 

unit after disassembling from provided water line.

2. Connect both water line from the unit and water line in the kit.
3.  Tighten the compression nut onto the compression fitting. There should be no gaps between 

(A, B & C )

4. Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make 
sure you get a snug, leak-free connection.

Before being used, the leakage in these places should be examined

•   Samsung Warranty does not cover WATER LINE INSTALLATION.
•   It will be done at customer’s charge unless the retail price 

includes installation cost.

•   Please contact Plumber or Authorized Installer for the installation 

if needed.

•   If Water leakage occurs due to improper installation, Please 

contact installer.

Setting Up 

01 SETTING UP

 

DA99-01623F-03.indd   15

2010.10.15   8:35:11 AM