Intel D425KT BLKD425KT Manual Do Utilizador

Códigos do produto
BLKD425KT
Página de 89
Product Description 
17 
1.5 
Intel
®
 NM10 Express Chipset 
The Intel NM10 Express Chipset provides interfaces to the processor and the USB, 
SATA, LPC, LAN, PCI, and PCI Express interfaces.  The Intel NM10 Express Chipset is a 
centralized controller for the board’s I/O paths. 
   
 
NOTE 
The board is designed to be passively cooled in a properly ventilated chassis.  Chassis 
venting locations are recommended above the processor heatsink area for maximum 
heat dissipation effectiveness. 
 
For information about  
Refer to 
The Intel NM10 Express chipset 
Resources used by the chipset  
Chapter 2 
 
 
1.5.1.1 
Video Memory Allocation 
Video memory is allocated from the total available system memory for the efficient 
balancing of 2-D/3-D graphics performance and overall system performance.  Dynamic 
allocation of system memory to video memory is as follows: 
•  256 MB total RAM results in 32 MB video RAM 
•  512 MB total RAM results in 64 MB video RAM 
•  1 GB total RAM results in 128 MB video RAM 
•  2 GB total RAM results in 224 MB video RAM 
1.5.1.2 
Analog Display (VGA) 
The VGA port supports analog displays.  The maximum supported resolution is 2048 x 
1536 (QXGA) at a 75 Hz refresh rate. 
1.5.1.3 
Flat Panel Interface (LVDS) - D425KTW Only 
The flat panel interface (LVDS) supports the following: 
•  Panel support up to UXGA (1366 x 768) 
•  25 MHz to 112 MHz single–channel; @18 bpp 
⎯  TFT panel type 
•  Panel fitting, panning, and center mode 
•  CPIS 1.5 compliant 
•  Spread spectrum clocking 
•  Panel power sequencing 
•  Integrated PWM interface for LCD backlight inverter control