Samsung DVD-HR753 Manual Do Utilizador

English - 18

This section involves various methods of 
connecting the HDD & DVD RECORDER to other 
external components and required initial setting 
modes.
You can connect your HDD & DVD RECORDER to the 
television using the SCART cable if the appropriate 
input is available on the television. 

Connect the RF cable as shown.
Connect one end of the SCART cable to the AV1 
socket on the rear of the HDD & DVD RECORDER.
Plug the other end into the appropriate connector 
on the television.
Plug in the HDD & DVD RECORDER and TV
Turn on the HDD & DVD RECORDER and TV.
Press the INPUT SEL. button on your TV remote 
control until the Video signal from the HDD & DVD 
RECORDER appears on the TV screen.

The RF cable connection of this product sends 
only signals of TV. You must connect SCART 
cable or Audio/Video cables to watch a DVD 
from your HDD & DVD RECORDER.
TV mode : Press the TV/DVD button on 
remote control, then “TV” appear on Front LED 
display (or turn off HDD & DVD RECORDER). 
Then you can watch programmes received 
through TV.

1.
2.

3.

4.
5.
6.

M





External device (VCR/Satellite receiver)

Connect the AV2 connector of HDD & DVD 
RECORDER and VCR/Satellite receiver or digital 
tuner using a SCART cable.
Connect the AV1 connector to the SCART AV 
connector on TV.
Turn on the HDD & DVD RECORDER, VCR/
Satellite receiver or digital tuner and TV.
Set Input mode on AV2.

Press the TV/DVD button on remote control, then 
“TV” appear on Front LED display. (or turn off HDD 
& DVD RECORDER.)
You can watch programmes from a satellite or 
digital tuner connected to this HDD & DVD 
RECORDER, even when the HDD & DVD 
RECORDER is turned off.

1.

2.

3.

4.

1.

2.