Human Touch ijoy-2400 Manual Do Utilizador

1.  Power off the chair then unplug it.

2.  Using a utility blade, peel the label off the main power panel, located on the left-hand side of the chair (Fig.1).
 Note: Be sure to record the serial number that is printed on the power panel label before discarding it.
 The serial number is required for warranty service.
3.  Using a Phillips-head screwdriver, remove the two screws that secure the power panel to the chair (Fig.1).
4.  Using a flat-head screwdriver, pry the panel out of the chair enough to expose the connectors, then disconnect
 the connectors (Fig.2).

5.  Remove the power panel from the chair (Fig.3).

Tools Required: Phillips-head screwdriver, utility blade, flat-head screwdriver.

SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY

1

To ensure that Human Touch

®

products are repaired in a manner that is fully consistent with the practices used during the manufacturing process, Human Touch requires that all

product repairs are performed using only factory-new parts and in accordance with these product repair instructions.

SERVICE LEVEL: 2

(Fig.2)

REPLACING THE MAIN POWER PANEL

Jan 04, 2010

Peel the label off

(Fig.1)

Power panel

Power panel

flat-head screwdriver

Connectors

(Fig.3)

Power panel removed

Power panel