pyrocluster cinema 4d 9 Manual Do Utilizador
PYROCLUSTER
REFERENCE 49
Gain
Gain set to 0% (left),
50% (center) and 100% (right).
Gain controls the noise intensity on the inside of the effect. A setting of 50% is used
as the center of intensity (the same number of bright and dark pixels).
as the center of intensity (the same number of bright and dark pixels).
Bias
Bias set to 10% (left),
50% (center) and 100% (right).
Bias controls the noise intensity on the outside of the effect. A setting of 50% is used
as the center of intensity (the same number of bright and dark pixels).
as the center of intensity (the same number of bright and dark pixels).
Low Thres., High Thres.
From left to right: Low Thres. set
to 0% and 50%, High Thres. set
to 50% and 100%.
These values set the low and high clipping limits of the noise range. The clipped
noise range between Low Thres. and High Thres. is stretched to fill the entire range
(0%–100%). Mainly you would increase Low Thres. to create more holes in the noise
and decrease High Thres. to create fewer holes.