frontier-design tranzport quickstart Manual Do Utilizador
TranzPort
™
Quick Start Guide
Welcome to the world of wireless DAW control!
This document includes installation instructions and basic setup information for TranzPort. After you complete
the procedures in this Quick Start Guide, please refer to the documents on the CD-ROM for more detailed
information about using TranzPort with specific recording applications and control plug-ins.
In addition to this Quick Start Guide, your TranzPort package should include:
• TranzPort remote control unit
• TranzPort USB interface
• CD-ROM containing driver installation files and application-specific documentation
• Four AA alkaline batteries
Windows 2000/XP Driver Installation
1. IMPORTANT: Make sure that your TranzPort
USB interface is NOT connected to your
computer to begin this installation!
computer to begin this installation!
2. Insert the TranzPort CD-ROM into your
computer’s CD-ROM drive. In a few moments,
the TranzPort menu will appear. (If it does not,
use Windows Explorer to navigate to the top
folder of the CD-ROM, and double-click the
“autorun.exe” file.)
the TranzPort menu will appear. (If it does not,
use Windows Explorer to navigate to the top
folder of the CD-ROM, and double-click the
“autorun.exe” file.)
3. Select ‘Install Drivers’ from the menu to run the
automatic installer. Follow the on-screen
prompts, making sure to select any application
specific plug-ins you want to install. (These can
be added at a later time if needed).
prompts, making sure to select any application
specific plug-ins you want to install. (These can
be added at a later time if needed).
4. Once the installer has run, connect TranzPort’s
USB interface to any available USB port on your
computer. TranzPort will be detected
automatically, and the “New Hardware Wizard”
will appear.
computer. TranzPort will be detected
automatically, and the “New Hardware Wizard”
will appear.
5. Select “Install the software automatically” and
then click “Next.”
6. When the Windows Logo warning appears,
select “Continue Anyway.”
7. When the Wizard finishes this part of the
TranzPort software installation, click “Finish.”
8. After a few seconds, another “New Hardware
Wizard” will open automatically. Repeat steps 5–
7 to install the TranzPort WDM Interface.
7 to install the TranzPort WDM Interface.
9. It is recommended that you restart your
computer to complete the installation process.
The TranzPort icon should now appear in the
Task Bar on the desktop (usually at the bottom
right of the screen).
Task Bar on the desktop (usually at the bottom
right of the screen).
Mac OS X (10.2.8+) Driver Installation
1. IMPORTANT: Make sure that your TranzPort
USB interface is NOT connected to your
computer during this installation!
computer during this installation!
2. Insert the TranzPort CD-ROM into your
computer’s CD-ROM drive. The “TranzPort
Installer” window will open.
Installer” window will open.
3. Double-click the file called “TranzPort Installer”
to start the installer.
4. Follow the prompts to install the driver. (Note:
you will need the computer administrator’s
password to install the TranzPort drivers.)
password to install the TranzPort drivers.)
5. Restart your computer to complete the driver
installation process.
6. Connect TranzPort’s USB interface to any
available USB port on your computer.
The TranzPort icon should appear in the Status
Bar (usually at the top right of the screen).
Bar (usually at the top right of the screen).
For additional information about using TranzPort, or about updating or removing the TranzPort drivers, please
refer to the User’s Guide PDF file on the TranzPort CD-ROM. If you had any problems during driver installation,
please see the Troubleshooting section of the User’s Guide PDF file on the CD-ROM.
refer to the User’s Guide PDF file on the TranzPort CD-ROM. If you had any problems during driver installation,
please see the Troubleshooting section of the User’s Guide PDF file on the CD-ROM.