Apple color classic ii.perf 275 Manual Do Serviço
Troubleshooting
Symptom Charts/Hard Drives - 12
Hard Drives
Internal or external
hard drive does not
operate
1 Verify that SCSI loopback card is not attached.
2 Verify that internal hard drive has all three terminating
resistor packs on circuit board.
3 Verify that external drive is properly terminated.
4 Replace hard drive.
5 Replace logic board. Retain customer’s SIMMs, math
coprocessor, and PDS card.
6 Replace hard drive data cable. See “Flat-Cable Assembly” in
Take Apart.
Works with internal
or external SCSI
device but does not
work with both
1 Verify that SCSI device ID switch setting on external device
is higher than 0. Also verify that ID switch setting on
external SCSI device does not duplicate ID switch settings on
any other attached external SCSI devices.
2 Replace terminator on external SCSI device.
3 Replace SCSI select cable.