Apple emac ati usb2 2005 Manual Do Serviço
eMac ATI Graphics/ USB 2.0/2005 Take Apart - 81
Front Bezel
Procedure
1.
Remove the eight bezel screws. There are three on each side and two at the top of the
bezel.
Important: DO NOT remove the two larger screws circled below, or the two screws
shown in the next photo. If they are removed, the CRT will be out of alignment and
the entire display/analog assembly will need to be replaced.
2.
Important: On this side of the computer, do NOT remove the CRT screws located
under the red circles. The CRT will be out of alignment if these screws are removed.