Apple twentieth anniversary mac Manual Do Serviço

m Check your printer settings in the Chooser (in the Apple [K] menu), making sure you have selected

the correct printer. If you are using a printer that is shared by other computer users (a printer on a
local network), make sure that AppleTalk (in the lower-right corner of the Chooser) is active. If you
are using your own printer (a serial printer connected to your computer), make sure that AppleTalk
is inactive.

m Turn off the computer and printer and check the printer cable connections. 

m If none of these suggestions solves the problem, you may need to reinstall the printer driver that

came with your printer. Refer to the manual that came with your printer. (See the following
important note.)

Note:  If you have an Apple printer, install the most recent driver available.

Nothing happens, or an error message appears when you try to print.

m There may not be enough memory for printing. Try the following:

m Quit the application immediately after sending the Print command to free up memory for

printing.

m Increase the amount of memory for the desktop printer icon; select it, choose Get Info from the

File menu, and type a larger number in the Preferred Size box.

m Reduce the amount of memory the application uses.

m Make sure the printer is turned on. Some printers need to warm up for a few minutes after you turn

them on.

m The printer may be out of paper or may need attention. Check the printer status lights and any

messages on your screen. 

m Open the desktop printer icon and check for status messages.

m Reinstall your printer software.

Solutions 

to Common

Problems

229