Apple appleshare ip 6.0 Guia De Configuração Rápida
16
Chapter 1
Setting Up TCP/IP
In order to enable users to use file sharing services over TCP, visit your Web site, or use TCP-
based client mail or FTP applications, you need to set your computer’s network connections
in the TCP/IP control panel.
based client mail or FTP applications, you need to set your computer’s network connections
in the TCP/IP control panel.
Note:
If you have already set up your TCP/IP control panel or completed the Internet Setup
Assistant after installing Mac OS 8.1, you do not need to follow the instructions in this
section. Skip ahead to “Setting Up Energy Saver” on page 23.
section. Skip ahead to “Setting Up Energy Saver” on page 23.
To set up the TCP/IP control panel, follow these steps:
1
Open the TCP/IP control panel.
If TCP/IP is inactive, the following dialog box appears.
2
Click Yes.
The TCP/IP control panel appears.
3
Choose User Mode from the Edit menu.
The User Mode window appears.
4
Click Basic, if it’s not already chosen. Then click OK.
Important
If you plan to install an AppleShare IP server on this computer and use a dial-up
(modem) connection to the Internet, skip these instructions and go to “Setting Up TCP/IP
and PPP (for Modem Access Only)” on page 18.
and PPP (for Modem Access Only)” on page 18.
Important
If your Internet service provider has provided you with software that
automatically configures your TCP/IP control panel, do not change the settings made by the
ISP software program. Skip ahead to “Setting Up Energy Saver” on page 23.
ISP software program. Skip ahead to “Setting Up Energy Saver” on page 23.