Apple powermac server g3 minitow Manual Do Serviço
Basics
Data Buses - 18
devices to the EIDE bus.
If you are connecting a single device to the EIDE bus, you
should use the J9 connector (the one closer to the rear
panel). If you plug a single device into the J10 EIDE
connector and leave J9 empty, the device may not boot.
However, if the system is booting from a device that has the
Apple CD-ROM driver v 5.4.1 or later installed, you can
connect a single CD-ROM drive to either the J9 or J10
connector, and the system will recognize it.
If the Power Macintosh G3 Minitower ships with two EIDE
devices (a CD-ROM or DVD-ROM drive and an ATA hard
drive), both EIDE connectors (J9 and J10) will be
automatically used. Service Providers should keep the J9 vs.
J10 issue in mind, however, when testing G3 Minitower
units.